External Control / MIDI / Behringer X-Touch Compact
Interface with X-Touch Compact in MC mode
< Back to drivers listYouTube Videos
Frequently Asked Questions (FAQs)
Encoders 9-14 are not generating events.
That is a limitation of the X-Touch MC mode mapping. If you notice the LED indicators on the X-Touch, you will see that the MIDI OUT does not light up when you rotate these encoders (it means the controller is not sending any MIDI output).
Element Options
Input Device
The input device
Output Device
The output device
Functions
Enable Element
Enable this element
Disable Element
Disable this element
Change Element Page
Changes the page on this element
- Change Type: The change type - one of {Next, Previous, Go To}
- Change to Page: Change to specific page, when Change Type is "Go To"
Refresh Element
Disable this element
Send Raw MIDI Message
Sends a MIDI message to the connected controller
- MIDI Message: Desired message to send (e.g. "90 0A 5F")
Send MIDI Data
Sends raw MIDI data to the output
Controls
MIDI Data
Fader 1
Fader 1 Touch
Fader 2
Fader 2 Touch
Fader 3
Fader 3 Touch
Fader 4
Fader 4 Touch
Fader 5
Fader 5 Touch
Fader 6
Fader 6 Touch
Fader 7
Fader 7 Touch
Fader 8
Fader 8 Touch
Button 1,1
Button 1,2
Button 1,3
Button 1,4
Button 1,5
Button 1,6
Button 1,7
Button 1,8
Button 2,1
Button 2,2
Button 2,3
Button 2,4
Button 2,5
Button 2,6
Button 2,7
Button 2,8
Button 3,1
Button 3,2
Button 3,3
Button 3,4
Button 3,5
Button 3,6
Button 3,7
Button 3,8
Button 4,1
Button 4,2
Button 4,3
Button 4,4
Button 4,5
Button 4,6
Button 4,7
Button 4,8
<<
>>
Loop
Record
Stop
Play
Layer A
Layer B
Master Fader
Master Fader Touch
Master Button
VPot 1
VPot 2
VPot 3
VPot 4
VPot 5
VPot 6
VPot 7
VPot 8
VPot 9
VPot 10
VPot 11
VPot 12
VPot 13
VPot 14
VPot 15
VPot 16